WinTV-HVR-4400 (PCI-e, Analog/DVB-S/S2/DVB-T)
Modellreihe 121xxx - nur DVB-S/S2 wird unterstützt, ab Kernel Version 3.16.
lubuntu.04LTS hat < 6,8, kernel! uname -r

allgemeines vorher machen :https://wiki.ubuntuusers.de/DVB-Karten/

Benötigt die Firmware-Datei dvb-fe-tda10071.fw

Firmware von Hauppage laden :
https://www.hauppauge.de/site/support/support_linux.html#tv_tuner
,sonst:
Übersicht mit KI
To install the dvb-fe-tda10071.fw firmware file, you'll typically need to copy it to the correct firmware directory on your system. The location can vary depending on your Linux distribution, but commonly used locations include /lib/firmware or /usr/lib/firmware. After copying, it's often helpful to reboot your system or reload the relevant kernel module to ensure the firmware is loaded and used by the DVB (Digital Video Broadcasting) device. 
Here's a more detailed breakdown:
1. Locate the firmware file:
First, confirm you have the dvb-fe-tda10071.fw file. You can often find it in a DVB firmware repository like OpenELEC's dvb-firmware repository. 
2. Identify the correct directory:
Determine the appropriate firmware directory for your system. Common locations are /lib/firmware or /usr/lib/firmware. 
3. Copy the firmware file:
Use a command like sudo cp dvb-fe-tda10071.fw /lib/firmware (or /usr/lib/firmware) to copy the file, using sudo for administrative privileges. 
4. Verify the installation:
After copying, you can check if the firmware was loaded correctly using sudo dmesg | grep tda10071 (or the specific module name for your device), according to the Ubuntu wiki. A successful load will show a message similar to "found firmware revision 20 -- ok". 
5. Reboot or reload module:
A reboot can help ensure the firmware is properly detected, or you can try reloading the relevant kernel module (the specific command will depend on your DVB card and module). 


https://linuxtv.org/wiki/index.php/Hauppauge

scannen mit wscan
https://wiki.ubuntuusers.de/w_scan/

neues
Wscan_ccp macht fehler ! in vlc funkt. nicht.